C-Scope
The Signal Injector is an accessory that allows the Signal Generator signal to be safely applied to an electrical system via a conventional 3-pin power socket. The C.Scope Signal Injector is an accessory which when connected to a C.Scope Signal Generator or Transmitter applies a signal safely to an electrical system via a conventional 3-pin power socket. This signal will then be detectable on the buried supply cable outside the building and any supply cables within the property. To transmitted signal can then be detected by a C.Scope Cable Avoidance Tool or Precision Pipe and Cable Locator.
A Signal Clamp is a safe and straightforward way to apply the Generator/Transmitter signal to a cable or small pipe to enable precision tracing of this service. The C.Scope Signal Clamp allows operators to apply the Signal Generator/ Transmitter signal effectively to any cable. It is an extremely practical way to allow individual cables to be traced even when the cable is in amongst other cables.
The C.Scope Metal Pipe Sonde is a small, self-contained low frequency transmitter that can be used inside metallic pipes. To address the problems of detecting the position of a blockage or other relevant feature within a metal pipe, the C.Scope Metal Pipe Sonde is specially designed with a low frequency signal output that is capable of being transmitted through the metal pipe walls to the surface. This makes it ideal for finding the position of blockages in metal pipes or for use with a camera and is powerful enough to be detectable at up to 5 metres depth with a C.Scope Precision Pipe and Cable Locator (dependant on pipe material and wall thickness).
The Duct Sonde 33KHz from C.SCOPE is a transmitter used to trace the direction of small and congested ducts or conduits. The C.Scope 33KHz Duct Sonde is a small battery powered transmitter which can be screwed onto the end of a duct rod and inserted and fed into a a duct or conduit. The direction of the duct or conduit can then be traced by a C.Scope locator set to Generator/ Transmitter Mode. The location of a blockage can be identified using this system with enormous cost saving potential. Often the standard sized Sonde is too large to pass between cables when tracing electrical, telecommunication or cable conduits or ducts. The solution is the C.Scope 33kHz Duct Sonde. The small diameter Duct Sonde, developed in conjunction with British Telecom, can be fed easily inside ducting without snagging.
Please contact us or download the brochure if you would like to know more about the C.Scope accessories.
BACK IN STOCK
The C Scope SGA4 is an affordable Signal Generator designed for use alongside a CXL4 or DXL4 Cable Avoidance Tool. It enables significantly more underground utilities to be detected including street lighting cables.
BACK IN STOCK
The C Scope CXL4 Cable Avoidance Tools from C.Scope represent a significant advance in cable detecting performance. Innovative new features have been introduced and the popular existing modes of detection have been enhanced to allow the CXL4 Cable Avoidance Tool to successfully detect even the hardest to find pipes and cables. Particular attention has been paid to effect better working practices and to minimise the potential for human error to impact on operating performance. Optional Upgrade Available - Data Logging/GPS/Bluetooth.
BACK IN STOCK
The C Scope DXL4 Cable Avoidance Tools from C.Scope represent a significant advance in cable detecting performance. Innovative new features have been introduced and the popular existing modes of detection have been enhanced to allow the DXL4 Cable Avoidance Tool to successfully detect even the hardest to find pipes and cables. Particular attention has been paid to effect better working practices and to minimise the potential for human error to impact on operating performance. Optional Upgrade Available - GPS/Bluetooth.
***BACK IN STOCK***
The C Scope MXL4 Precision Locator with Data Logging Depth Measurer represents a significant advance in cable detecting and tracing capabilities. Innovative new features have been introduced enabling the MXL4 Locator and MXT4 Transmitter to provide high-end precision performance and a far more flexible approach to pipe and cable location. Optional Upgrade Available - GPS/Bluetooth.
***BACK IN STOCK***
The C Scope MXT4 Transmitter is designed for use alongside an MXL4 Locator. It enables a far more flexible approach to pipe and cable location enabling the operator to accurately detect, pinpoint, trace and identify the widest range of pipes and cables.
***BACK IN STOCK***
The C Scope SGV4 Signal Generator is designed for use alongside a CXL4 or DXL4 Cable Avoidance Tool. It enables significantly more underground utilities to be detected including street lighting cables.