Klarna pay is now available.

Menu

Surveying Accessories

Sort By

26 Products
Sort

Mixed Fibre Yellow Colour Glove, Coated with Hard Wearing Latex on The Palm and Fingertips, Suitable for Building, Construction, Concrete & Brick Handling.

***PLEASE SELECT 'WORKWEAR POSTAGE' FOR ALL WORKWEAR ORDERS***

Velcro Fastening, 2 Band and Brace, Contrast Piping and Conforms to EN ISO 20471:2013+A1:2016 Class 1. 100% Polyester. COLOUR OPTIONS - Orange or Yellow.

YELLOW: MEDIUM - x1, LARGE - x1, XL - x2, 2XL - x2, 3XL - 1. 4XL - 2.

ORANGE: MEDIUM - x3, LARGE - x3, XL - x2, 2XL - 7, 3XL - 2, 4XL - 1.

***PLEASE SELECT 'WORKWEAR POSTAGE' FOR ALL WORKWEAR ORDERS***

Size
Large
X Large
XX Large
Colour

6 point adjustable PE suspension harness, Good impact resistance performance, Compatible with a range of accessories and one size fits all. Colour: Yellow.

***PLEASE SELECT 'WORKWEAR POSTAGE' FOR ALL WORKWEAR ORDERS***

Colour
Protective, hardwearing glasses which work alongside the GPR Red Beam Laser.
The Chartwell 2426 Survey / Collimation Book is an essential on site accessory, used to record collimation,  reduced level and the distance of surveys. Fully waterproof and the paper has a high strength even when wet, which is ideal for adverse sight conditions. Case bound, wipe clean cover and rounded corners to save pocket wear.

Metal washered pin survey nails, ideal for surveying and setting out purposes.

For hard surface penetration.

Complete with steel support washer.

Can also be used on their own by hand driving them into a variety of hard surfaces.

  • Use the C59 adapter with the Spectra Precision HR320 Receiver.
  • Use the C45 adapter with the Spectra Precision HL450 Receiver.
  • Use thr C70 adapter with the Spectra Precision HL700/HL750/U and the Spectra Precision HL760 Receiver. 
This Genuine UK Spectra Precision charger can be used with the following Spectra Precision External/Interior and Grade Lasers: LL300, LL400, LL500, HV301, HV301G, HV40, GL4X2, GL5X2, GPlus & 1242.
Reflective Targets are an inexpensive range of retro-reflective targets, working with most EDMs and are ideal for monitoring work where you have to leave targets in position over long periods of time. The 25mm square fluorescent Retro-Mark Yellow is highly visible in daylight. A single 25mm target will give a measuring range in excess of 100m with mm accuracy and an angle of intersection of up to 60 degrees. Greater distances can be achieved by using multiples of 5 and 9 targets which are easily attached with the self-adhesive backing.
NiMH Battery charger for the GPR-R95 and GPR-G9 Laser Level Kit. Input voltage: 100-240V~,50-60Hz Output voltage:7.5V.

***SPECIAL OFFER - BUY TRIPOD AND STAFF TOGETHER FOR £75.00+VAT***

5m Seco Staff graduations are in centimeters on the front and numbered every 10 cm. height scale is in millimeters on the back. Rods come with a level vial and a case. Lightweight aluminum sections are in contrasting white, red and black colours and have round spring-loaded locking buttons, length 5m.

GPI GPR-R9 Battery Pack. 1.2V NI-MH 3500mAH. Compatible with the GPR R95 Laser Level and the GPR G9 Laser Level.
100m, 50m and 30m Richter Tape, 13mm Wide Nylon Coated Steel Tapes – Made In Germany by Fredrich Richter.
***SPECIAL OFFER - BUY TRIPOD AND STAFF TOGETHER FOR £75.00+VAT***
Ultra high capacity: 4 x 1.2V NiMH 10,000mAh in a battery cradle. Suitable for the followings Lasers ONLY: LL300S LL400HV HV302 HV302G GL412N GL512N GL422N
The Spectra Precision® QM20 Laser Distance Meter is compact, fitting comfortably in your hands and in your pocket or tool belt. Simply press a button to take a measurement - simple to operate and easy to use. The measuring range is 165 feet (50 m) and functions include indirect measurements using the Pythagorean mode. Area and volume calculations are also possible. It is handy for difficult vertical measurements, cluttered environments, over water and other measurements for which tape measures are not convenient.
The Spectra Precision® HR320 Laser Sensor / Receiver is a durable laser receiver for exterior leveling applications. LCD’s on the front and back display a 5 segment grade arrow that indicates grade position. A loud beeper is designed to be heard on noisy job sites. Fine and medium accuracies are selectable to meet various applications and conditions.

Stores perfectly in the instrument container, the GMP111-0 offers high positional accuracy due to their small size. The GMP111-0 is mounted in a polymer holder with 1/4" thread fittings, has a built-in levelling bubble and is supplied with the GLS115 four-section pole and attachable point (1/4" thread). With this arrangement a point can be measured with very high precision.

*ONLY 2 AVAILABLE*

The Nedo Winklefix Mini measure angles up to 180° quickly and accurately. Easy to use, you simply position the Winkelfix and the angle is shown in degrees on the analogue display. This angle finder is a reliable, robust and convenient tool for use in the building trade.
The Spectra Precision® HL450 Laser Sensor / Receiver is an easy-to-use tool that accurately measures elevations across the site, and is ideal for use with any rotating transmitter. Highly versatile HL450 laser sensor / receiver for basic and advanced levelling and aligning applications.

This sensor digitally displays the offset value to on-grade, which is designed to help make elevation and vertical alignment control easier and faster for any application. The LS-100D features an extra-wide beam capture sensor that also rejects annoying interference from strobe light exposures. The large and bright LCD displays (front and back) feature 9-channels of grade information and digitally display the distance to on-grade. By pressing the hold button, the display is locked so the user can conveniently read the results.

AUTHORISED TOPCON UK DEALERS.

The Spectra Precision HL760 Sensor / Receiver features a digital readout of elevation that provides a numeric display of ± 5 cm (± 2 inches). The readout is displayed on the large front and rear LCD’s and shows exactly how far the elevation is from on-grade for fast and easy cut/fill readings. Accurate measurements can be made without moving the rod clamp, saving time and increasing productivity. Selectable units of measure can be displayed meeting your application – mm, cm, ft, in or fractional inches.

***SPECIAL OFFER PRICE WHEN TRIPOD AND STAFF BOUGHT AS A PACKAGE***

These tripods accommodate 5/8 x 11 instruments and are designed for all types of jobs. The 5m Seco Staff graduations are in centimeters on the front and numbered every 10cm.

The Trumeter Roadwheel (5000) is a professional and robust road measuring wheel with a built in stand and brake. The wheel is available in metric or imperial versions and is ideal for any distance measuring application.

One Line - Marking Paint - 750ml - Pack of 12 - Semi-permanent line marking paint used most commonly in construction and civil engineering applications. Fast drying and sold in a range of colours.

BLACK - WHITE - YELLOW - BLUE - ORANGE - GREEN - RED

The Spectra Precision® CR700 Combination Laser Receiver is a machine mounted display receiver used on small grading and excavating equipment as well as a traditional laser receiver mounted to a grade rod. The CR700 includes both a magnetic mount for quick machine mounting and a grade rod clamp.