FREE Delivery on Lasers (GPR-R95, RL-H5A, LL100n and LL300n).

Menu

Vivax vScan Metal Mode KIT - Standard / GPS / Bluetooth

METAL MODE KIT

The vScan utility avoidance tool has been designed to make buried utility detection a simple and cost-effective process. You don’t need to be an electronics expert to get the most out of the vScan‘s features. Main features and operational controls are in keeping with industry standards so minimal training is required. Together with the dual frequency transmitter, data logging, optional metal manhole cover detector, GPS, and Bluetooth, the vScan is available in various models to suit all applications.

Kits are supplied with Receiver, Transmitter, Alkaline batteries, USB Cable, Connection leads, Ground stake, Transmitter stand and Soft carry bag. 

Please note that the £100 has already been deducted from the original price.

vScan Metal Mode KIT - Standard / GPS / Bluetooth

METAL MODE KIT

OVERVIEW - RECEIVER

The vScan utility avoidance tool has been designed to make buried utility detection a simple and cost-effective process. You don’t need to be an electronics expert to get the most out of the vScan‘s features. Main features and operational controls are in keeping with industry standards so minimal training is required.

Together with the dual frequency transmitter, data logging, optional metal manhole cover detector, GPS, and Bluetooth, the vScan is available in various models to suit all applications.

The vScan locator kits are shipped with a spacious canvas carry bag which fits the receiver, transmitter, leads and any optional accessories.

FEATURES - RECEIVER

  • Large, high resolution, high contrast dot matrix display: makes signal interpretation simple and intuitive.
  • Auto backlight: for use after dusk.
  • Compass line direction indicator: ensures correct alignment over utility
  • Visual, audible and vibration alerts: alerts can be set for: shallow cable, overload, excessive swinging and overhead cables.
  • Passive signals: power, radio and also as a free option, cathodic protection (CP) 100Hz.
  • Current measurement: helps positively identify the targeted line.
  • Simple two button operation: on/off and information (such as depth and current).
  • Movable speaker: allows the user to place the speaker against the ear whilst holding the receiver at arm’s length
  • Robust ABS casing with rubber protection bumpers for all site condition use.
  • 2GB auto data logging: helps identify usage and training needs.

OVERVIEW - TRANSMITTER

The VM-550FF Transmitter has one induction frequency; three direct connect and a fault-find frequency. The LED indicators on the transmitter show the frequency selected, output level, and battery status. An audio indicator beeps to advise the quality of the connection.

This one-watt transmitter can transmit the locate signal onto the target line three ways. By direct connection, if direct access to the line is available, by induction by simply putting the transmitter in induction mode and placing it over the target line with the induction arrow in line with it or by clamp mode and using the induction clamp to clamp around the target line.

The wide frequency range from the VM-550FF Transmitter makes this a very versatile transmitter. The 83kHz induction frequency makes it ideal for inducing the signal onto large diameter, direct buried iron pipes with bell and gasket connections, and for using the induction clamp around smaller pipes. The lower 512Hz and 8.192kHz are good for direct connection to trace cables, and the 83kHz direct connection is good for high resistance pipes or for use with pushrod camera systems to trace the deployed pushrod. The Fault-find frequency can be used with the VM-510FFL+ to locate cables and find ground to earth faults on them.

Packaged in a lightweight, rugged, ergonomic IP54 housing, the Transmitter provides consistent current output in direct connect, clamp, and induction modes. The Transmitter has protection against inadvertent connection to incoming voltages up to 240V. The Transmitter comes standard with direct connection leads, ground stake; clip-on carry straps, and D cell batteries.

FEATURES - TRANSMITTER

  • Protection against inadvertent connection to incoming voltages up to 240V
  • Lightweight and ergonomic at 2.47 lbs./1.2kg
  • Optional Li-ion battery pack
  • High impact ABS construction
  • Small, lightweight profile

Please note that the £100 has already been deducted from the original price.

DOWNLOADS FOR RECEIVER

MyvScan Data Managment Mapping Apps UK V1.1

vScan Brochure VXMT UK V1.1

MyvScan Brochure VXMT UK V1.1

vScan Technical Specifications V1.6

vScan User Handbook V1.5

DOWNLOADS FOR TRANSMITTER

VM-550FF&VM-560FF Transmitters Technical Specifications V1.3

Kits are supplied with Receiver, Transmitter, Alkaline batteries, USB Cable, Connection leads, Ground stake, Transmitter stand and Soft carry bag. 

product review overlay image

Customer reviews

No reviews left yet
Write A Review

No reviews have been left for this product, be the first to leave a review