**PLEASE NOTE, NO ORDERS WILL BE PROCESSED ON THE 2ND AND 3RD OF JUNE 2022, APOLOGIES**

Menu

Tel: 01909 517108 (8am - 5pm)
Email us here
Order before 2pm - Next Day Delivery

Vivax Metrotech

Sort By

17 Products
Sort
£469.00
£562.80 (inc. VAT)

The VM-550FF Transmitter has one induction frequency; three direct connect and a fault-find frequency. The LED indicators on the transmitter show the frequency selected, output level, and battery status. An audio indicator beeps to advise the quality of the connection. This one-watt transmitter can transmit the locate signal onto the target line three ways. By direct connection, if direct access to the line is available, by induction by simply putting the transmitter in induction mode and placing it over the target line with the induction arrow in line with it or by clamp mode and using the induction clamp to clamp around the target line.

From: £579.00
£694.80 (inc. VAT)

The vScan utility avoidance tool has been designed to make buried utility detection a simple and cost-effective process. You don’t need to be an electronics expert to get the most out of the vScan‘s features. Main features and operational controls are in keeping with industry standards so minimal training is required. Together with the dual frequency transmitter, data logging, optional metal manhole cover detector, GPS, and Bluetooth, the vScan is available in various models to suit all applications.

**PLEASE NOTE THAT THIS MODEL DOES NOT INCLUDE METAL MODE**

From: £646.00
£775.20 (inc. VAT)

The vScan utility avoidance tool has been designed to make buried utility detection a simple and cost-effective process. You don’t need to be an electronics expert to get the most out of the vScan‘s features. Main features and operational controls are in keeping with industry standards so minimal training is required. Together with the dual frequency transmitter, data logging, optional metal manhole cover detector, GPS, and Bluetooth, the vScan is available in various models to suit all applications.

From: £948.00
£1,137.60 (inc. VAT)

The vScan utility avoidance tool has been designed to make buried utility detection a simple and cost-effective process. You don’t need to be an electronics expert to get the most out of the vScan‘s features. Main features and operational controls are in keeping with industry standards so minimal training is required. Together with the dual frequency transmitter, data logging, optional metal manhole cover detector, GPS, and Bluetooth, the vScan is available in various models to suit all applications.

Kits are supplied with Receiver, Transmitter, Alkaline batteries, USB Cable, Connection leads, Ground stake, Transmitter stand and Soft carry bag. 

**PLEASE NOTE THAT THIS MODEL DOES NOT INCLUDE METAL MODE**

£3,275.00
£3,930.00 (inc. VAT)
The vCamMX-2 all-in-one mini inspection system gives you the flexibility to cover a range of inspections including indoor drain lines, residential plumbing, indoor commercial lines, and lateral lines up to four inches in diameter. The vCamMX-2 control module is designed and manufactured with the plumbing contractors’ needs in mind. The latest technology in imaging and recording are packaged in a rugged ABS injection molded housing mounted to the stainless-steel frame is made specifically for harsh conditions.
From: £1,015.00
£1,218.00 (inc. VAT)

METAL MODE KIT

The vScan utility avoidance tool has been designed to make buried utility detection a simple and cost-effective process. You don’t need to be an electronics expert to get the most out of the vScan‘s features. Main features and operational controls are in keeping with industry standards so minimal training is required. Together with the dual frequency transmitter, data logging, optional metal manhole cover detector, GPS, and Bluetooth, the vScan is available in various models to suit all applications.

Kits are supplied with Receiver, Transmitter, Alkaline batteries, USB Cable, Connection leads, Ground stake, Transmitter stand and Soft carry bag. 

From: £802.00
£962.40 (inc. VAT)
The 5-Watt broadband transmitter has selectable induction and direct connection frequencies from 98Hz to 200kHz, SD mode (Signal Direction), fault find and true resistance measurement up to 1 Mohm. The two inch by one-inch dot matrix display with LED backlight shows output current, connection type, volts, resistance, frequency, volume, battery condition and high voltage warnings.
From: £1,084.00
£1,300.80 (inc. VAT)
The 10-Watt broadband transmitter has selectable induction and direct connection frequencies from 98Hz to 200kHz, SD mode (Signal Direction), fault find and true resistance measurement up to 1 Mohm. The two inch by one-inch dot matrix display with LED backlight shows output current, connection type, volts, resistance, frequency, volume, battery condition and high voltage warnings.
£2,535.00
£3,042.00 (inc. VAT)
The powerful 25-watt transmitter is the go-to transmitter for cable fault locating, finding holidays on coated pipes, problematic deep-buried lines, and long-distance pipe and cable locating. The Loc3-25Tx is also well suited for applications for cathodic protected longline pipelines and gas distribution in city areas needing a low-frequency high output transmitter.
£1,235.00
£1,482.00 (inc. VAT)
The vLoc3-Cam is the easiest to use sonde locator on the market today. The omni-directional antenna array allows for approaching the sonde from any position. The directional arrows will guide the user first to the front or rear locate point and then directly to the sondes position. 
From: £1,633.00
£1,959.60 (inc. VAT)

The vLoc3-Pro utility locator introduces new innovative tools for locating buried utilities assuring damage prevention whilst gathering information for analysis. With two sets of screened 3D antennas signal distortion is easily detected and displayed on the bright full colour display. Along with classic locate screens the vLoc3 series locators offer new locate perspective screens of Vector Locate for fully automatic non-walk over locating, Transverse Graph showing both peak and null simultaneously providing immediate measurement of signal distortion, Plan View showing the relative orientation of the cable at any angle, and a new graphical Sonde screen with guidance arrows leading to the sonde location even when it is vertical.

From: £2,058.00
£2,469.60 (inc. VAT)
The vLoc3-5000 utility locator brings an innovative element of digital signal processing, position capturing and broadband frequency selection to buried utility locating. Data captured by the internal GPS or external GPS via Bluetooth can be downloaded for further analysis, use with GIS systems or google maps. Use the free VM-MAP smartphone application to create real-time maps with GPS data and data from the locator such as time, date, depth of cover, current on the line, and add custom comments to each entry.
£37.00
£44.40 (inc. VAT)
The 12V vehicle charging lead will charge a locator’s Li-Ion rechargeable battery pack from an automotive cigarette lighter socket. This 12ft/4m lead makes it easy to stay charged up whilst on the go.
£112.00
£134.40 (inc. VAT)
As an optional extra the vLoc3-Pro and vLocML3 receivers can be fitted with a Bluetooth communications accessory. This allows communication with external devices such as GPS and or Dataloggers. The Bluetooth option can be retrofitted and can be ordered at a later date if preferred.
£140.00
£168.00 (inc. VAT)

The Garmin GLO™ brings you the best of both worlds by combining GPS/GLONASS receivers with Bluetooth® technology so you can enjoy precise position information on your iPad, iPhone or Android device. The Garmin GLO™ can receive position information from both the GPS and GLONASS satellite constellations, allowing it to connect to up to 24 more satellites than devices that rely on GPS alone. This allows GLO™ to lock on to satellites approximately 20 percent faster and remain connected even at high speed. What’s more, GLO™ updates its position information at 10 times per second — that’s up to 10 times more often than the GPS receivers in many mobile devices.

From: £24.00
£28.80 (inc. VAT)
Use the extension spool to extend the ground connection to reach a suitable grounding position. Extending the ground allows the user to move the ground lead to various positions to help the transmitters signal to travel further. By extending the length of the ground lead the user can use locate tactics such as performing a double ended connection.
£147.00
£176.40 (inc. VAT)

The Live Cable Connector is usable on live cables up to 480 V ac 60/50Hz. The Live Cable Connector operates on frequencies of 8kHz, 33kHz and SIS. The Transmitter provides power in, the output leads from the separation filter can be connected to conductors carrying up to 480V AC. Note that the Live Cable Connector should only be used by approved operatives adhering to company regulations and work practices whilst using appropriate safety equipment and clothing.